nvr

Any setup with an NVR will need a hard drive to function as it is what all your footage is saved to. The WD Purple Drive is our go-to recommendation for the vast majority of IP setups as it designed with the high workload requirements of 24/7 surveillance solutions in mind. Please see the guide...

Dear all, I have around 20 cameras which are a mixture of IP (x10) and Turbo HD (x10) cameras coming into respective NVR (x3) and DVRs (x3), to view these we use a number of iVMS machines (x4). Am I right in thinking that the NVR/DVRs act as a form of streaming server or for every feed on my...

Hi everyone. Forgive me for my ignorance. Yesterday an engineer installed a 6 camera system and NVR. A pyronix alarm will be added on Saturday. At the moment I am using the ProControl+ app, plus accessing the HIkvision NVR via IE to edit the camera settings. The connection is great and...

Good afternoon all, I am looking at a HikVision PTZ Camera with Tracking. However after some investigation I have hit stumbling point and I'm hoping someone here can help. I have been looking at the following camera's; DS-2DE4A425IW-DE 4 MP 25× Network IR PTZ Camera DS-2DE5425IW-AE (B) 4 MP...

Hikvision has released new firmware for their I-Series Network Video Recorders. The latest firmware, Version 4.40.010, can be downloaded here. NB - you may need to refresh your browser when viewing the Hikvision portal to see the newly added version at the bottom of the list. The Release Notes...

We recently had a customer ask the below question: "Hi, I have a DS-7608NI-I2 / 8P NVR - I was wondering if there is any way to get similar functionality that you get when directly sat at the NVR; but remotely? I have access to the Hikvision interface via a browser but its missing features like...

Hi I have a Hikvision DS-7608NI-K2/8P 8 Channel NVR, bought in 2016, which the power supply recently failed on. I have replaced the power supply with the same make and model which is working correctly. Now when I boot up the NVR it does not show up on the network and the SADP tool does not find...

Hi, My CAM are pluged into the NVR (POE) and the CAM are declared on a sub network. Is it possible to have the CAM and the NVR on the same network? Regards Michel

8 Cameras - DS-2CD2355FWD-I/G - V5.6.3 1 NVR - DS-7616NI-K2/16P - V3.4.16 I had previously had the NVR on V4.1.1 but I realised it was unsupported, and my cameras were not always displaying properly on the monitor and I had to mess around with the stream settings...

I have installed 2 4k Hikvision cameras that work perfectly I bought a new camera which is active and working on the NVR but when I go to live view it on screen it only shows previous 2 and get an error message "no more IP camera allowed" when I try adding it into the view page but shows up...

Hi there, I have just checked to see if there is any new firmware for my DS-7716NI-K4 / 16P and noticed that the V4 firmware version is no longer available on the UK download site. Link Is there any reason that the V4 version is missing and should I downgrade to the latest version in there...

Hi all, I would greatly appreciate some advice. I know that reolink cameras are not thought of highly but for me they do the job, or at least they did. I purchased 2 x 410 5mp cameras for front and back of the house. Pictures are very good, day and night. I have been recording 24/7 onto a...

Hi All, Please can someone help me understand whether my SD card is being utilised for recording in parallel to my NVR? I cannot figure this out, the recording to the NVR is definitely working but having installed a 128GB card to the camera I cannot see any options anywhere to check. Any help...

I'm looking into setting up a CCTV system to monitor the exterior of my house. The neighbours car was recently vandalised during the night so that has spurred me on to get this sorted. 3 cameras should suffice, two to the front and one to the rear (at least for the time being) The front wall of...

Hello all, I've got the following setup at home: NVR: DS-7604NI-K1(B) CAM1: DS-2CD2385G1-I CAM2: DS-2CD2065G1-I CAM3: DS-2CD2143G0-I Now, there is a need to install another 6 cams. So I am now scratching my head and thinking, whether I should buy a 2nd NVR, smth like DS-7608NI-K2/8P PoE for...

Hello all I currently have an Alteq 8 Port NVR and i am trying to find the lastest frmware version. Been searching for ages and cant seem to find a thing on this brand. The idea to update it and default it before I sell the NVR + 4 x 4MP Dome Cameras. If i look on the system the current...

I have a new HikVision 6 Cam system that works well for about 8 hours, then the NVR crashes loosing all video streams. A hard reboot (unplug/replug) usually brings everything back on line. The Kit is Model EK1-Q82T46 and the NVR is ERI-Q108-P8, purchased in September in USA. The NVR Firmware...

Hi, I'm pretty new to CCTV, and have narrowed my selection of DVR's down to an NVR (with IP camera) technology for my property. However, probably stupid question but I'm gonna ask it anyway... If I'm out and my internet goes down (e.g. maliciously), then I won't receive any alerts, rendering...

I have been thinking about purchasing a Hikvision NVR for quite sometime now and having looked at the various series and models on the Hikvision website I am particularly interested in the DeepinMind Series because I would like to reduce the number of false alarms by utilising the latest smart...

So... upgraded from a 5mpPOC set up to 5 ds-2cd2385G1’s, I have a previous G1 and a auto tracking PTZ that were running via POE switch, Today comes swapped everything over and the NVR wont even power the cameras that have been previously set up via the switch, I have restored these and they...