Recent content by LoinKing

The problem isn't settings being lost. The issue is that whenever I view camera in HIk-connect, in the first 3-4 seconds it seems like its adjusting white-balance, after that it settles down to correct white balance. This never happened to this camera when it was installed at a different...

I had an older camera 2CD2143G0-I that works perfectly fine, before it was removed. I installed a 8MP in its place and decided to use this in-place of a basic 4mp ip camera (1143G0). Since in NVR I have cameras setup in a specific order, I just updated the IP address of existing channel to this...

What issue did you experience with motion? I also have NXI-K nvr and updated to latest firmware today.

I have a few G5 ColorVu cameras (Dome and Turret) with latest firmwares. I've set up Intrusion detection on them, checked Human and set Target validity to 'Higher'. Still I'm getting false alarms because of cats at night. Interestingly, earlier I had Motion Detection setup with Human checked...

Any idea if K-series AcuSense NVRs would get 5.0 GUI?

Go to any item's page and scroll down to Download Center e.g. DS-2CD2087G2H-LI(U)

UPDATE: Firmwares are now listed again on the international website.

Mine NVR & Hikconnect been working flawlessly for years, although not 7204HUHI - which is a discontinued model so maybe doesn't have the processing power etc.

I'm in MENA region but I usually download firmware from the Global-EN - because it usually has all camera/nvr models listed regardless of availability in local market. I did try switching to MENA and several other regions but it seems like firmware for certain products are gone now. For example...

I've been using hikvision's global website to download firmware for cameras/nvr (I'm not in EU), but it seems like they recently removed the firmware from their website. E.g. There used to be a firmware entry below the specs table: DS-2CD2387G2H-LISU/SL But now its gone. I tried search Support...

Yes, the hand-tightened nut. Its not doing its job, even after fully tightened.

DS-2CD2045FWD-I https://www.hikvision.com/en/products/IP-Products/Network-Cameras/Pro-Series-EasyIP-/DS-2CD2045FWD-I/

I have a few year old hikvision bullet cameras. When new, I was able to tighten the locking nut and the camera would lock in place firmly. Now, it doesn't matter how much I tighten the locking nut, I can easily move the camera by hand. Is there a way to fix this?

Can you share links to JST-XH 2 Pin 2.5mm connectors for hikvision nvr case fan?

Are you using this alarm as standalone or is it connected/reports to a security alarm company backend?