Search results

As a supplementary note, there is a lot of accurate advice provider by others here. However as of this date: Hik's AI( pattern matching) cannot distinguish between a pigeon, duck or human using accusense recorders/cameras latest kit - yes that's right. If you search Hik documentation(good luck)...

Hi. What NVR model and firmware are you using?

Hey Marco. Be very careful with Thermal cam VCA events compatibility with NVR. I have expereince with HeatPro and depending on the NVR model and firmware version push notifications and alarm contact at rear of NVR may not work at all. Even if you using I series acusense NVR. If you wish to reply...

Sure you can use a VPN client to punch out to public internet

The first thing you want to do if you want to use 4G is evaluate which is the best mobile network to use, establish the strongest network signal and the number of cells available with special phone app. Don't use a mobile phone signal bars as a measurement device and certainly don't use an...

You might find something here: Audio Devices - System Q Ltd - Systemq.com

How did you add the camera to the HIk-Connect App? Serial number or QR code.? QR codes are problematic with certain iphones/OS versions. Even though this problem does not exist on Android, I always use camera or NVR serial number to add.

You can't have your cake and eat it as they say ;) as you have already discovered. Most cctv cams with built in speakers are really only designed for indoor use(sound) or quiet small external areas - non commercial use etc; but realistically you will be up against it, if you have a large open...

Thanks Phil for link to other post. Seems sense of opinion on this forum and other sources that the rating is 12vDC @30mA. I would always use an interposing relay and not direct drive the load. Thanks.

Anyone know the answer to this? 1. What is the electrical rating for volts/amps for this contact? 2. Is it the same for all cameras -if not what is the detail? 3. No idea why this is missing from every Hikvision manual/datesheet I looked at but is there a Hikvision document somewhere? Thanks,

How did you add the Camera/NVR to the Hik Connect App? Try using the QR Code or Serial number option...it does not work with IP(local) For complete feature access you must add the device to Hik-Connect cloud platform service

Just to add to this. The model is a manual Pan and Tilt and motorised zoom. Another thing to try when software options seem missing is try a different browser or check plugin update. Now the newer cameras are being designed to work with chrome they don't work with IE.

I believe there was DST bug in an older version of iVMS4200 which was fixed

This problem was fixed on the ColorVu cameras via a firmware update

Is the new Dual Stream option for the Cloud Upload like MS Azure for example?

It's how the camera is added to Hik-Connect App which is the root of the problem don't use QR Code

Err what to say there's 3 threads on this 1. You can't remote access the system if you added it to Hik-Connect via a local IP address? 2. As mentioned this is an IOS issue causes by adding by QR code, its not a Mobile Carrier issue as mentioned in the other thread. Delete the system from App...

Standard IOS fault if the system is added by QR code to App. Delete the system from the App then re add with serial number this time. Before you DELETE the system use Hik-Connect App to take note of your serial number. Also what about Hik-Connect platform login? Did you unbind the NVR from...

There are bugs on both mobile platform apps sometimes common, sometimes not, but there are bugs in IOS that as re not in Android also, myths get us knowhere

From the Marketing department