Search results

Thanks. I have intrusion and line crossing set up on all cameras. Also use motion for the areas not covered by the above.

Hello Using DS7608 K2 with V3 firmware, G1 Go cameras. All firmware up to date. I would like to know if there is a playback option that shows wheere on the screen the motion has been detected as its difficult to know what is detected on some images. I notice on VLC player there is such an...

Well. First off you can point cameras down the street but suggest if its pointing at some one elses property use the privacy settings to block out their house and also you need to put up a sing saying CCTV in use or something like. I would also keep the cameras up and report any threats of...

All the junction boxes have glands that are too big for the cable. My first solution was to pass the cable through a bit of rubber hose that then allowed the gland to tighten around it. My second that I believe is the right solution is to place the weather proof RJ45 connector that comes...

There's also no date stamp etc so looks to me as it you are not showing all of the image on the screen. I'd try follwoing the setup again and see what happens.

I am going through an NVR. Rotate your phone to Portrait. Arrow appears bottom right.

When pressed you get this

The arrows pointing NE / SW bottom right corner of the image.

Kyle Have tried and can't find the custom view button on version 3.0. K series NVR running 3.4.103 Thanks

It is squashed for me also on HIK Connect when you first go into the stream but there is a button bottom right of the steam with two arrows to expand the view. If you do this it will fill the screen. The first picture posted by Kyle shows the expanded view that I get.

Hello Kyle Are you able explain the steps described in Part 3 that should be followed when using Version 3 NVR GUI. Thanks

For your info on IR range. This is the image from my 6mm 4mp GO camera. The back fence that is top of picture is 30m away. The camera is mounted at 5m on the wall. Also pic for comparison showing daytime image

Or you could bin the NVR and just connect the cameras and manage them by either IVMS or browser. The Hikvision cameras have SD card support so recording on the camera is available using this option but I am not sure how you can access the recorded footage. I expect admin will be able to advise...

You can pick up Hikvision HiLook for that price if you shop around. A quick look on a site for a trader in Bidford on Avon gives me Hikvision HiLook IPC-T250 (H) 5MP IP Turret camera with 30M IR + POE for a couple of quid over £60 with the VAT. If you talk to the traders they may have open...

Hello Two options. Use an abrasive and / or a solvent. The important thing is to ensure you do not degrade the wertherproofing of the camera or scratch the lense when doing it. I would start with a fine abrasive such as wire wool to scar / loosen the paint and then very carefully use a...

Hello Could I give a view on whether to use brackets or proprietry junction boxes when mounting the cameras. In my limited experience as a DIY installer, mounting cameras directly to the external wall is fine if the cable is going to go through the wall immediately. I.E. you won't see the...

Thanks a lot Dan As you say sensor size is larger on the colourvu, as also is the standard aperture F1.0 as opposed to F1.6. I note the difference in minimum lux levels for colour vision also. So as you say there should be more light coming into the Colourvu camera that would help. I will...

Good evening Dan This post is really interesting to me as I have been toying iwth replacing my current 2365G1 camera with the 2347G1 Colorvu. I have external street lighting and PIR lighting in the area that the 2365 covers but want to deal with a dark patch that is not lit unless the PIR...

Hello David Yes, I can and now thanks to you can also access camera GUIs. Thankx for your help, much apprecaited.

My cameras are connected directly into the ports of the NVR and I always use the NVR to access my cameras but I now want to via a Browser. The equipment I have is using the follwoing IP addresses. NVR ... ... 0 .. Cameras ... ... 254 .. Router Gateway ... ... 0 .. 3 cameras are Plug and Play...