Search results

I have the DS-E04NI-Q14P NVR and cannot find the ‘Virtual Host’ flag setting in either the NVR interface or Web interface. Normally it is under the area as shown in the attachment. My other Hik NVR has it and I realise that the DS-E04NI-Q14P is a low-end mini NVR, but surely the option should...

I have the following 2 NVRs: LOCAL - NVR - DS-7732NI-M4-24P REMOTE - NVR - DS-E04NI-Q14P The remote NVR ports have been correctly forwarded. I have added the IP address from the remote NVR to the local NVR and I can select the cameras to add. Works perfectly. However, the remote NVR has a...

The unofficial cameras are Hik PnP friendly, the following is the link to them: NetviewCCTV 5MP Gen2 PIR Style IP Camera with PoE Mic & Audio - Hikvision PnP I have had 3 of these for quite a few years and they have always worked with my NVR. Recently I replaced my NVR with the...

Thank you.

I upgraded my M-Series NVR from 'V4.61.430 - Build 231123' to 'V5.02.006 - Build 240328'. I have 18 cameras, where 16 are official Hikvision cameras and 2 are unofficial Hikvision cameras. With firmware 'V4.61.430 - Build 231123', all the cameras were online without issues. After upgrading the...

Is there a away to access the cameras connected to the DS-E04NI-Q1-4P through their own logins. There is no 'Virtual Host' feature on the DS-E04NI-Q1-4P?

I have a DS-7732NI-M4-24P NVR and a DS-E04NI-Q1-4P NVR. Both are setup at different locations. I have port forwarded the DS-E04NI-Q1-4P NVR. So remotely I can add the DS-E04NI-Q1-4P NVR to my DS-7732NI-M4-24P and choose the cameras to add. The problem is that I can view the streams, but I would...

I have a DS-7732NI-M4-24P - POE Network Video Recorder with 16 cameras connected to it. 4 of the cameras have a mic and speaker built-in for 2 way communication via the HikConnect app. It all works very well. However, since I have a monitor in my office with the cameras always displayed, I...

I think the Hikvision and ONVIF protocol is broken on 5.x firmware. Can anyone confirm if they have managed to connect a non-Hik camera on 5.x using either the Hikvision or ONVIF protocol?

Sorry forgot to mention that there are no devices linked in Hikconnect

Hikvision already tried removing me from the Blacklist when I was on 4.x and 5.X sevral times, so they are still trying to figure it out.

So I have an odd situation, The 2 non-hik cameras that worked with the Hikvision protocol on version 4.X did not work with version 5.X, so in 4,X I changed them to ONVIF and they work with the ONVIF protocol seamlessly. So I then updated again to 5.X and it does not even recongnise the cameras...

Hmm, wonder why they can not fix mine.

Actually I have been in contact with Hikvision for 2 weeks and my new NVR is still blacklisted. Everytime they release it, Hikconnect goes online for a mimute then again blacklisted, they are still looking into it. :-( When yours was blacklisted, di you get teh error code 'Offline(0xe0020008)' ?

When I turn off the Plug and Play and add them as a visable device, the only way to do this is to add them as an RTSP stream. Then all you get is a video stream, no smart events, etc. Plus since these are directly connected to the NVR, the NVR dictates the settings and overrides the camera settings.

Thank you for the swift reply. Yes, I could connect using HIKVISION_RTSP, but even if I set the event like line crossing directly on the camera, it is not picked up through the NVR, since it is only seeing the data stream. I have not tried ONVIF, as yet. I am curious, why do you think Hikvision...

Hi people, I upgraded to V5.02.005 - Build 240318 from V4.61.430 - Build 231123 and I can not see 2 of my cameras. I have 18 cameras in all attached as plug-in-play. The 16 cameras that appear with no issues are genuine Hikvision cameras. The 2 that do not appear are cameras that used to work...

Hi did you ever get this resolved, since I have the same issue after I downgraded the firmware?

I had an older model Hikvision NVR which has been replaced with the DS-7732NI-M4-24P. I have 16 cameras connected to the POE ports of the NVR. On the old NVR and also the new one I have, every time I do an export of the NVR settings and then import them, all settings are recovered correctly...

I am curious, on this post, you talk about firmware version V4.63.025 build 231201. Is this for a UK NVR? since on the main download page for the M series, its shows V4.61.430 - Build 231123 as latest V4...