Search results

You have a g5 firmware cam, as you mentioned in your other post. There is no .160 for the g5 firmware. Only 114 and then the .800, but there are the lights not available anymore.

You might try smart events, intrusion detection or line passing.

i had the same, i was triggered by your post, and checked my G5 firmware of the DS-2CD2047G2-LU. I had upgraded last week from 5.5.114 to 5.5.800 but overlooked the issue which you are referring to. This was the version i installed and i managed to "downgrade' via chrome and...

@DK_CAM I’m running 2 of the ds-2cd2047g2-LU with G3 firmware and 1 = G5 so (C). Firmware G3 = V5.5.160 build 210416 Firmware G5 = V5.5.114 build 210512 this G5 is also doing things less then the G3 version. all are connected to an hikvision nvr 7604NI-1K/4P (B). i was adviced after a...

I didn't dare to upgrade yet to 5.5.800, as i experienced the same issues as you, but I'm curious as well. I've asked my seller to get in contact with Hikvision to see if they recognize the issue and more what to do about it. What I did figured out in between was that certain settings were...

it seems to be on the global website only but not mentioned as the (C) like they did with the (B) model. https://www.hikvision.com/en/products/IP-Products/Network-Video-Recorders/Pro-Series/ds-7604ni-k1-4p-/?q=ds-7604ni-k1-4p&position=1 And there they provided the new firmware...

Could it be the (C) version of this NVR? On the portal for this one the latest Firmware is V4.30.217 build210204

@Dan Do you have possibly any insights into the .085 version or from Hikvision in relation to DS7604-K1/4P(B) - Firmware Issues V4.30.061 if that adds G5 support and therefor rule marking to notification? Or could it be that it is just G5 itself which has the issue that the rules are not...

you have to add them in the NVR, but first you have to turn off 2 POE ports, to get "free" ports to add the wifi ones, so not the ones which are connected to the NVR. Add Non-PoE IP Cameras You can disable the PoE interface by manually selecting while the current channel can be used as a normal...

I didn't get better results, it seems almost that it got worse. for example passing cars that put their lights on my car, I now get earlier notification about my static car then before.

I have 2 cams DS-2CD2047G2-LU with G3 firmware 5.5.160 210416. When setting the intrusion detection and linkage to the notify surveillance Center,when a event is registered and sent to Hikconnect you get an "picture" including the rules and the object is "marked". While some reason, on my...

I did install it, but not sure that it really fixed the static target triggers. Had to adjust the sensitivity and target validity but still he find static targets as “ moving”. Will keep an eye on it. #edit I'm not impressed of the improved static targets trigger. Seems to me that it still...

the IP address 192.168.254.5 is a separate lan on the nvr check in your nvr if virtual host Is on, is in camera settings if it’s on, then you can reach your cams via nvr ip:65001 for cam 1. For example 192.168.1.56:65001 that works at my place

@JB1970 I can confirm that SVC was on on my device as well, i upgraded from 4.30.010 automatically to 4.30.055, it was still on. As i have only 2 cams (ds-2cd2047gu-lu) yet, it didn’t gave the no resource yet, but the third is on his way, so to prevent myself, i switched svc off on the nvr...

while you're able to get into the nvr cause all the camera's are working you said, so within hik-connect it all is OK now. In the NVR within the option camera you see the ip address of them, but those might be assigned by the NVR itself and therefor not accessible directly, but............ From...

What i would do is use your neigbours cable to see when connected that your nvr comes back to live and that your issue is resolved. Then you can replace that cable that isn’t working. We know the cable isn’t good, but you want to know that the issue is not at your router. So if possible remove...

Are the lights blinking green/orange above on the ethernetcable socket on the nvr and on the router? if no Lights are blinking then the cable isn’t in on router or cable is defective. Maybe someone has s longer cable to borrow from or even a lan-checker to test te cable. On the photo i can’t see...

To me it seems that the device doesn't get an proper DHCP adress from the router's DHCP server, as it assigns an APIPA address . APIPA stands for Automatic Private IP Addressing (APIPA). It is a feature or characteristic in operating systems (eg. Windows) which enables computers to...

I even found out that on the productwebpage this new 5.5.160_210108 firmware and release notes appeared to be downloaded, while on the eu portal it is gone.

Hi @Dan Thanks for your prompt reply. All is working fine and indeed this one is from grey import (sorry), they can be upgraded and downgraded with UE portal firmware, so no real issues, only a visual correction was needed, while the microphone is working fine, but the model without (U) is...