Search results

I’m sorry, your version states, so i was wrong here. Network Interface1, RJ-45 10/100 Mbps self-adaptive Ethernet interface and via Hik-Connect you are able to view your nvr? Did you select a camera into the nvr to share?

At my nvr it is set to automatic. specs are Network Interface1, RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface i can imagine as selecting only states 10/100half duplex/full duplex. you might change it to automatic To see if that have effect. do you also have hikconnect enabled?

Update till now setting the nvr to 1440 interval doesn’t seem to be change the time on the cams At all. They are all tens of seconds out of range of each other.

Is there a reason why the network seems to be 100mb full dup? Is your switch 100mb only?

loud & clear ;)

you might try to insert the picture next to the text, i guess then it will be added automaticaly

So the nvr is with poe ports, but they are not used? is the nvr ds7604ni-1k-4p (c)? According the firmware version it should the C version. Is the camera attached to the nvr or just to the switch? Is your router is providing the IP address to all your devices or did you set fixed ipaddress? can...

Hi @Kyle, no problem. I'll set the NTP server settings to pool.ntp.org with 1440 interval so see what is does. I also will de-select DST at the NVR. changing the time setting brings up something strange. time is 16:18 dutch time, with gmt +1 and summertime Change systemtime to 16:18 will...

@Kyle have set it back to ntp time on nvr, as the 1hr difference couldn’t Be solved. To my understanding setting ntp in network on the nvr with 60 min interval check seems not to work. Last night due to set back a half hour time difference pops up, despite ntp that didn’t correct it. I had to...

The time so far stays in line, but…… the notifications mention -1 hr, for example in notification there is a screenshot of the event which also reflects the cam time, 02.09.45 and notification mentions 01.09.45. I’ll guess that comes from the setting on the nvr to sync with platform.

Hi @Kyle, thanks for confirming, so i don't have to look further into settings. I tried to the synchronize, i had NTP active, but choose to try out the platform time synchronize, to see what the effect would be on time synchronization. So this could also be something that could help, I'll report...

@johnfitzy i do understand that deleting is not necessary, but maybe my version of the nvr software differs from yours. I'm version 4.30.085, i couldn't find the sync option when i edit the cam settings on the nvr, see below in cam settings or on the NVR GUI there is no "Time Sync Mode" section...

I’ll check the time sync option in the mentioned section on the nvr gui. I couldn’t delete a cam to try the new add cam with the sync option. not sure if my gui shows that option.

sorry for the mix-up in here

@Phil @Kyle thanks for your reply and it seems to me now more clear that NTP will not work via the NVR. I'll look it up to see if i can adjust the settings on the nvr with the already added cams or add them again with the check box selected and within the cams I'll select the manual time sync.

I've the same experience, for some reason adding settings to the networkpart of the camera seems not to be saved after reboot. @codlord @johnfitzy In my case the NVR has ip 192.168.2.125 and i can access the cams via 192.168.2.125:65001 etc. But for unknown reasons i can't get the NTP time from...

I’ll check the networkpart on each cam and will report.

I've have an NVR 7604NI-K1-4P(B). On which i've selected timechecks via NTP. The camera's attached to the NVR get their own IP address 192.168.254.4/3/2. (3 cams total attached) I'm not sure how to take care of the time-settings on the camera's as it seems that they are not able to "test"...

I've 1 camera (DS-2CS2047G2-LU) on which i have entered intrusion detection (human and car for try to access my carpark in the front of the house near the road). That works very good, only one thing, in the evening and morning when it is still dark, some cars are passing by and only the cars...

I didn't set that up, as hikconnect could connect to my nvr directly, so in my case no special things are forwarded. but that can off course be different in your situation or isp requirements. I guess you experience it right away if you install hikconnect on your mobile and try to access your...