Search results

It should work, but I can't say with any certainty you will be able to simply plug your existing cameras into the new DVR and they will work. For example, some analogue cameras have a connector with a push button that cycles through the signal settings. TVI/AHD/CVI/CVBS. Check if your cameras...

What firmware is your DS-KB6403-WIP on? Recent firmware release notes for the DS-KB6403-WIP mention 'Fixed failures of WiFi connection'. Another consideration, I believe only 802.11b/g/n is supported by the DS-KB6403-WIP. The Unifi AC-Pro might be prioritising 802.11ac.

The DS-7204HGH-SH is a late 2014 Turbo HD DVR. The cameras are analogue 720p OEM's (possibly made under license of Hikvision) connected via Cat5 Ethernet cable. Just to clarify, RJ45 is a type of connector used with Ethernet cable, not the cable itself. Typically analogue systems use RG59...

Getting events to trigger reliably and with minimum false alerts takes a lot of tweaking. I have spent hours pulling a dog sized box through intrusion zones and across line detection markers to prevent false alerts for animals. I understand your frustration. Out of interest what settings are...

At recent Hikvision roadshow I asked if they would allow downgrading in future revisions and the answer was no. The latest firmware v5.6.3 is working great, smart events too. In my testing, multiple concurrent events (motion/intrusion) are not totally reliable triggering alerts synchronously...

Any thing more detailed in the error log? From the manual: Local monitoring HDMI/VGA1 and HDMI2/VGA2 outputs are provided for DS-9600NI and DS-8600NI series NVR. HDMI and VGA outputs provided for DS-7600NI and DS-7700NI series NVR. It's not very clear but a limitation of the 7700 series perhaps...

Out of interest, please mention the make/model of the PoE switch.

On the underside of most Hikvision cameras there should be a sticker with model/serial info and possibly a QR code. If not, try get the model number of the cameras from the DVR to help with upgrade recommendations. It's not uncommon to use UTP cable for analogue installations with balun...

Surprised that ever worked! I recommend you start the process over using only Hik-Connect's service. I'd gladly step you through it but knowing the NVR model and firmware version will help. Also check you have the Platform Access tab available under Configuration>Network>Advanced.

Good place to start - Make sure you are running the latest firmware on the cameras and the latest driver for your GFX card. If you upgrade to the latest camera firmware you should be prompted to download a new version of WebComponents.exe, download it then close all browsers and run the file as...

Are you using H265 for the encoding? Camera models?

Did you figure it out? If not, check the following to eliminate some possibilities. I have not setup the Storage Server feature with iVMS-4200 v3 but hopefully the process is similar. More of a best-practice but important - Synchronize the time across all devices. If possible set the cameras to...

You will need WinRar to extract it. Download and install one of the following: Once installed you will be able to decompress the archive by double clicking the file.

Try this download. *Edit -The link is from the same site as the brand displayed on your camera.

See here. Their description includes 'baby monitor' but indoor WiFi panoramic dome seems reasonable.

Did you resolve the issue? If not, the first thing to try is rebooting the DVR (and your router if applicable) and check if the NOIP connection status changes. Else, consider the following: Your DVR should have EZVIZ Cloud P2P support (according to the latest firmware release). Latest firmware...

As you mentioned, it would be a waste to hobble the recording quality by restricting your 4K cameras to anything less than full HD. Provided your users don’t use the remote playback feature often you could try the following. For client-side software, I recommend iVMS-4200 v2.8.22. I find...

I use the Talend API Tester for Chrome.

I made a typo in the request with 'track' it should be 'tracks'. The following works with my camera (DS-2CD2025FWD-I). The camera is not connected to a NVR/DVR and records only to the SD card. Can't say this will work for the DS-2CD2442FWD. The following request stops or starts manual recording...

You might be running into a limitation of the Haswell's microarchitecture. Intel's Quick Sync's is known to have issues with decoding both H264 and H265 depending on the Intel HD Graphics drivers loaded. If 640x480 is acceptable you could connect to the camera's sub-stream using MJPEG.