Search results

Hi, only time i experience this kind of problem was when iphone had face autorization enabled. It was problem with iphone authorization, not hik-connect.

Just quick answer. You need 76/77-I series of NVR to run LPR camera.

I worked with OBS studio very little, but i remember that i needed to make new scene and new source. Play with that. You don't need to activate anything on the camera. If you copy that URL of RTSP on web-browser do you get an image...

Maybe it would be better to unbind your device using your hik-connect from mobile phone. Connect your mobile phone on Wifi that is in same network as your device. Go into manual add, enter device SN and you'll see on what acc device is, and below you'll see unbind device.

Use that wifi from mifi to connect camera onto internet. Wireless is enough for that camera + 12V ofcourse.

If I understood you correctly, this is what you need : https://www.hikvision.com/mtsc/uploads/product/accessory/Spec_of_DS-2CD2141G1-IDW1_V5.5.60_20180801(1).pdf Wifi camera that has SD slot ( you need to buy SD slot ). What do you mean when you say MiFi?

And you one more thing, we are a reseller of hikvision equipement in Croatia. We got notice from HIKVISION that they are done unbiding devices for clients.

Slim, you can unbind camera from HIK-CONNECT account using SADP tool or you can do that using your HIK-CONNECT account. When you login into your acc, go to manual add, enter device SN ( and be on the same network as your camera), then you will see on which acc is it on and you'll have option at...

Try to connect indoor unit on only one network. It's possible that indoor unit can't handle that so it's confusing her. FW upgrade? If it's possible, just for test, connect indoor unit and outdoor unit via cable on router. And try to set static IP adress on Wifi connection if you can't test it...

Maybe try with new HDD if it's possible? Or try without one at first.

Is your indoor unit showing same wifi network twice or you have router and extender on that network? You said that when you connected your indoor unit via LAN cable it all worked fine? As Kyle said, did you upgrade your FW?

I presume that the problem is in using WIFI and LAN at the same time. Disconnect LAN from indoor unit. We had problem when indoor unit was using WiFi and LAN and the same time ( wifi and lange was in same range). When we changed LAN range into 192.168.10.x and Wifi stayed in same range as...

Try to upgrade FW and replace little battery on motherboard. http://www.hikvisioneurope.com/portal/?dir=portal/Technical%20Materials/03%20%20DVR/00%20%20Product%20Firmware/%5BTurbo%203.0%5D/V4.30.110_Build200422 DVR K55 would be latest FW for you DVR. But check me.

You just need to use WiFi camera that you connect to your WiFi network. For recording you use continuously recording instead of motion detection. As simple as that.

And you need to download your FW to your PC, then login onto your DVR via web-page. Go to Maintenance, fw upgrade browse and then after choosing downloaded FW click upgrade. After that it is recommended to factory default your DVR.

DOWNLOAD EU PORTAL This is the latest FW for your DVR.

You can use external siren and control it with app. You just need to have external power adapter for your siren and use relay on NVR. Relay on HIK NVR can handle up to 36V 2A power. Just don't configure alarm output to motion detection and siren will be activated only via app.

Send me xml file to soldopalarm@gmail.com

As i know you can't use both motion and analitics. It wasn't working before ( don't know did they make any changes with latest FW). But you need to enable recording A1 in linkage.

For some reason i can't make reset file with exported file you sended me. Please send me again ( don't zip it).