Search results

Great to hear!! ..............

another similar setup

Tonyhaa I found the attached Instruction regarding Door Station & Door Phone Configuration that appears to be on the lines of what you are attempting to achieve, however i can't tell you if it is 2-Wire or IP based or if the settings shown are available with your set up. None-The-Less no harm...

Are you still within the warranty period? ............ I suggest you contact Hikvision Tech Support

Effectively using SIP Configuration ................ to change Ringtones? I'm impressed at your dedication for alternative ringtones :) ............. I assume you can adjust the Call/Ring duration via SIP/PBX too? ...................... but they all still ring at the same time, but different...

I believe thats what the Noise Filter Setting does, enables the self-cancelling/feed back from happening. Is there a Remote Config in the device settings on Hik-Connect? long shot though .....chances are DNS will need setting up any way. Have you Accessed the Device Settings through iVMS4200...

Your Intercom has 2x Outputs which are used to trigger/switch a connected device. Technically, NO1/COM is incorrect......... Output 1 will be NO1/COM/NC1 & Output 2 NO2/COM/NC2, these both function the same, described below. Definitions: NO - (Normally Open) which means the "relay" contact is...

"i i could only change the ringtone to a short notification sound , instead of 30 seconds ringing" I'm not certain about changing the Ringtone via the app, however the Hik-Connect app updated yesterday, so possibly this has been included or it may be a Phone setting option. The Configuration...

95% sure its in the settings of Hik-Connect ............. Labelled something like "Environment Noise Filter"

That would require Cabling from the Indoor Station to the Door Lock, pointless. Assuming the 2-Wires from your Door Station, that connect to your door lock, Switch to Ground, You would be better off introducing an additional secure method that would cut (+) power to the lock if the Door Station...

"wel prettig easy for burglars, just remove the intercom and they are inside.." that will depend if your door lock is configured to "Fail Safe" or "Fail Secure" Keypad??? .................. KH9310 is an Indoor Station & KD8003 is a Door Station, you have not mentioned/listed a Keypad? Unless...

SIP Configuration is only required if you are setting up multiple/external Indoor Stations ........ such as an Apartment Building, think of this as the WAN. No Need to configure SIP if you are setting up a single dwelling, where you need to the Door Station to communicate with an Indoor...

I have set up a few DS-KV8112-IM Door Stations with DS-KH6320-WTE1W Indoor Stations, only as One Floor Systems, they can be a little tricky. Note i am writing this from memory, so if i miss something, i apologise. 1. Activate, Set up & Configure the Door Station via iVMS4200. (ensure upgraded...

you need to ensure the Noise Filter is enabled in the Door Station Settings

I have not had any dealings with the latest 4.40 FW versions as yet ...................... however the following may be a Long Shot but worth a try. In previous FW versions, I have stumbled across this a few times with NVR showing as "Offline", however usually when attempting to share a device...

Crazy as it sounds ......................... are you being prompted to enter the verification code? I have stumbled across this a few times, however usually when attempting to share a device or other functions related to Hik-Connect. 1. Login to your NVR via Web Client 2. Navigate to "Network"...

Hi Gazaman, I have experienced similar issues with ealier versions on Samsung phones .......... unfortunately Samsung have a mind of their own on occassions. I suggest you uninstall Hik-Connect from your phone & re-install the latest Hik-Connect Version, from Hikvision website ...

I am a Security Technician and have no problems with obtaining password reset criteria directly from Hikvision or Authorised Distributor, as long as the product is not Grey Market/Import .................... so those who mentioned "happy to pay for password reset service" ....here is your answer