Search results

We are not talking about a multi-level enterprise system here .............................. just a localised 76xx system. Comparing Bottle Rockets to Jet Fighters. None the less, i have a couple of sites Operating 50-60 Cameras on a couple of 7732 NVR's & another Operating 96 Cameras on...

Yes, i've never been a fan of using Config Files ............................. I'm pretty versed in setting up NVR settings, takes bugger all time, so from my point of view just set it up again

Maybe try the following: 1. Delete the Device from Device Management tab in iVMS4200 2. Re-Start iVMS4200 & Add the Device again using Device Management Online Search if unsuccessful then i would Uninstall iVMS4200 from PC [& associated files], Reboot PC, the download & reinstall iVMS4200...

No..................... the instructions are for: 1. Setting Up Video Recording to a Device [On-Board Storage] SD Card 2. How to View the Recordings Stored on the Device [On-Board] SD Card the Device is referring to a Door Station unit/module or a Network Connected Camera etc. The bases is the...

Is there any particular reason why it is not normally suggested the NVR be Factory Reset after applying an upgraded firmware? Correspondences I have had with Hikvision Support will on almost every occassion suggest the NVR should be Reset. I might be the odd one out here, but it does make...

Had a similar issue a while back with a System consisting of 58 Cameras & 2x DS-7732NI NVR's, following the network topology i discovered the Overall Network ran on a Gigabit Connection, however bottlenecked at the Workstation PC with a 100mbs LAN Card

Smart Events [Line Crossing, Intrustion Detection etc] was relocated to the "Smart Analyses" tab of the NVR main Menu Page [located at top of screen, between Folders & Storage] Event (Normal Events) such as Motion Detection remain in the Settings Tab Location Hope this Helps Gary

Take note of which Display Port you are connected to [VGA or HDMI] Access the NVR GUI via Web Browser & in the Configuration tab, navigate to System > System Settings > Menu Output this is where you can change the Resolution Output to suit your Monitor for either VGA or HDMI The Menu Output...

"You have to remember that when you connect to http://IP_OF_NVR:65001 you are connecting to the WEB interface of the camera" Actually, Correction ....................... you are connecting to WEB Interface of the Camera via the Connected NVR. So effectively when attempting to add the camera...

Actually, that is incorrect ................................. you can have up to 8 Door Stations Connected to One Main Indoor Station. You need to Configure the first Door Station as the Main & in your case the other 2 as Sub-Door Station 1 & Sub-Door Station 2, then add them to your Indoor...

What you are missing is the Correct RTSP URL to access the NVR Connected Camera Feed Try the following and see how you go rtsp://192.168.178.55:554/Streaming/Channels/101 Effectively you are requesting the Mainstream RTSP Feed from the Camera Connected to Channel 1 of your NVR Alternatively...

Can you clarify something for me please? my interpretation of the above is: - you have "network connected" cameras (so connected to a PoE switch) which is on your home network with IP Range 192.168.1.xx & then manually added to your NVR? - your camera IP addresses are set to the Range hosted...

This would be highly dependable on what you are expecting the Camera to achieve!!! You need to take into consideration that these cameras are designed for the Wider, General Market providing some analytical functions for detection purposes etc. But in know means are they designed for Specific...

Rarely have i needed to make dramatic adjustments from default settings. if you can default the Video Parameters & Display Settings & try the settings in pics ................... Exposure is the only setting from Default changed <<EDIT: Set Exposure Time to 1/25>>

May i ask you to expand on what you mean by "Buggy at Best". From experience, issues with iVMS4200 & viewing/managing multiples of Network Cameras etc, is rarely a software issue. Many factors can contribute to VMS problems, such as: 1. A gross misunderstanding of the intention of a Video...

May I interject? I suggest prior to running the new plug-ins etc to firstly uninstall the previous versions from your PC & Restart your PC

Im not 100% certain if the Hikvision Access Control & the Villa Intercom are cross platform compatible. I have had some recent trouble myself, using a DS-K1F100-D8E USB Enrolment Station reading incorrect card numbers What Cards are you using? I wasn't using any Hikvision Access Control...

Ok my NVR is a DS-7616NI-I2/16P and is currently running Firmware Version v4.40.017 build 210830 The Accusense Camera is DS-2CD2386G2-ISU/SL, currently running Firmware Version v5.7.2 build 211109 Off memory, i just initiated 2-Way Audio via Hik-Connect and i could have a conversation through...

No Problem ............... not uncommon to find remote control conflicts, simple fix