Search results

yes Mainstram is visible and streams perfectly (its on a train line and I can see full movement with no delay). If I add the camera IP to IVMS I Can View without an issue and alter the config there are other devices added to the mesh and they all seem to have the same issue but to different...

They are Home Made cables however each one was tested via an RJ45 tester and it seems strange that it is only the mesh unit ones that have the issue, I can't change them yet as the site is 200 miles away so will book a further visit Also why would the web gui of the camera be fine?

NVR Is a DS-9632NI-I16 Currently it has 18 channels in use 4 of which are for a panovue camera The cameras are DS-2DF8436IX-AELW I have added the cameras to the NVR via the same method and have added the screenshots that show the different settings i can configure via the NVR (if i log...

Hi I have 2 Cameras linked to my NVR via a Wireless bridge I have added them Via the Web GUI but for some reason they treat the main feed as the sub feed thus having lower resolution and bit rate.

As long as it isn't tight bends it shouldn't make any difference. For any cable that is showing outside, it may be worth considering using conduit to add a bit of protection from it getting cut by anyone Obviously try and keep distances as short as possible

Im getting the same just see follow and ignore

thanks will have a word with Hik Tech support

Hi I have a request to install 20 Pano VU cameras each with 4 channels obviously this is 80 channels in total, I know the NVR's are not fit for this many channels but didn't know if I could use a dedicated server running IVMS as my NVR and have these installed on there instead thanks

I have the same issue and it seems to be when using Hik Connect, It then causes the network to drop out until i unplug it and plug back in

I have the same issue with my NVR B series and the Android App. The I phone app is fine as are the other series NVRS

the easy IP ones do work though don't they? specifically this one DS-2CD1021

Hi guys just a really quick question can you use Hi watch branded cameras with the standard hikvision NVR as these seem to be a bit cheaper then even the easy IP range

HI I have a few NVR's DS7716NI, D9632NI. I can create new users but not as Admin. Is there a way to do this? I have the option when I create a user to set as an operator or User

can you connect your computer to the remote switch and try SADP to see if they show up then

frustratingly after clearing the downloads and redownloading the update, it has now worked maybe I should have tried that first :oops:

other cameras on the network have upgraded via the batch tool. Last option will be to visit the site

Currently tried on a windows 10 pc that is on network via VPN tunnels and also tried on a windows server 2012 r2 machine that is the exact network (no VPN) I can get the Web Gui up and go to maintenance and add the digicap file Press upgrade and get the Device will reboot message select Ok...

Followed the Guide still the same error the serial number for camera is DS-2DE4225IW-DE20180517CCWRC22497692W I have tried different machines aswell short of factory reset not sure what else I can try restored everything but IP to default and still the same issue

Hi guys I have 3 DS-2DE4225IW-DE that won't upgrade firmware, I have tried via the camera web GUI and a batch configuration tool and get the message failed to get the upgrading progress. Currently, they are on V5.5.71 108725 however the latest is 5.5.8 HIKVISION UK PORTAL any suggestions

that the image I have but the bolts are too big to go through the bracket as in the picture I have one here I have tried it seems to be the expansion jacket that stops it (i know its the wrong way round I did that to show where it stops )