Recent content by stripfiguur

Yes, the doorbell is available in the dropdown menu in the motion settings on the NVR. I also can check or uncheck the motion detection and i can draw the area. But if i click on the save button, i will get the message as attached in my post from yesterday at 2:23 PM. So everything is possible...

I enable it on the KV6113 itself. This because i can not do it in the NVR settings. No, it is not connected on the NVR PoE ports. I added the camera by IP adress (with Hikvision protocol).

Yes thanks, then this BLC "problem" is solved. Changing the events settings in NVR is not solved, this also does not work in iVM-4200.

Thank you. I tried now in iVMS-4200. I found out that this function only works when I have WDR disabled. Is this correct?

Hello Kyle, The BLC option is only visible when i'm logged into the camera directly. In the NVR i can not see him so i can not turn it on there. The error message (Tip message) when i want to save event settings on the NVR is: "Invalid operation." Is comes directly when i push the save button...

Hello, We have a DS-KV6113-WPE1(B) door station (firmware V2.2.53 build 220713) and i'm afraid it has some bugs. In the dark only the front door is visible and the rest is very dark. So i would like to change the BLC. But when I want to change the BLC setting, it says it has been saved but...

Bug: With this firmware the strobe no longer works. It lights up for a few seconds and goes out again.

Just tested. Unfortunately the problem has not been solved yet.

I have performed the upgrade. I'll let you know tonight if the strobe works again. (I'm not at that location right now).

Oke, but it is strange why it is not possible on this NVR. Because the cameras themselves do have a 5 second post record. And my other NVR also does have that setting. Wouldn't this be a bug in the NVR?

Thank you for your answer. Then i know it is not a problem in my setup. Do you have the same firmware version as me? If i have it right, there are newer versions in the download portal? (V5.7.11_221009 and V5.7.11_220913, date 17-10-2022)...

Hello, I have multiple Hikvision NVR's but with one i have a problem with de post-record setting. It is a DS-7604NI-K1 / 4P NVR with firmware version V4.72.106 build 220725. On other NVR's the minimal Post record setting is 5 seconds. But on this NVR the minimal post-record setting is 30...

Hello, I have a Hikvision DS-2CD2387G2-LSU/SL camera with stroboscope and audio alarm. Before i could activate the stroboscope light with the HIK-Connect app when i was live viewing. I think, after upgrade to firmware version V5.7.10 build 220830, the stroboscope is not working anymore. When i...