Recent content by henry

they scrubbed my link-- https://www.amazon.com/CMVision-IR56-56-Outdoor-Illuminator-Adapter/dp/B00EDRMWVG/ref=sr_1_7?crid=2G8BD5GN8GWOE&keywords=cmvision-ir-&qid=1655341633&sprefix=cmvision-ir-%2Caps%2C340&sr=8-7

Hello--you can tweak the settings all you want--but just use an ir light to fill in where needed--they are cheap and work well---cmvision has good ones i have used----hh...

Hello Dan-- I have a screen with all 9 cameras showing--it displays for about 6-8 seconds-then it swithces to a screen with all 9 boxes with the 'no link' showing in each one--and in 6-8 seconds it goes back to all cameras showing --back and forth--doesn't happen with the second hdmi...

Hikvision 7716--4.5 gui--two hdmi outputs--have nine cameras--been working fine--now the monitors shows it cycling from camera images to 'no link' in the 9 boxes--it goes back and forth at about 6-8 second intervals--tried different cables--used second monitor but same problem--the secondary...

HK 4.0--nvr-- enable privacy mask--in UI i go to camera then choose privacy mask-there is only one camera listed in the drop down list to utilize privacy mask out of 9 total domes--how do i enable the others--the new manual skims over this--must be some prior configuration step to configure...

I have a new Hikvision 7716NI-I4-8TB- out of the box i turned it on via front power button--the unit face buttons lit up but the power light did not go to blue as stated in start up guide--it stayed white--the HDD light flashed red--the HikVision logo came on the screen for about 30...