01304 827609 info@use-ip.co.uk Find us

Recent content by Erudes

  1. E

    Network Unreachable for Cameras on DS-7104NI-E1/4P NVR

    Update 2: All done, reset the password, now it works, still dont have the option to virtual host but I can work with it. Thanks
  2. E

    Network Unreachable for Cameras on DS-7104NI-E1/4P NVR

    Update: I was able to upgrade firmware through web GUI, I will proceed to reset the camera's password... I really don't know what else to do, I still don't have the option to enable virtual host...
  3. E

    Network Unreachable for Cameras on DS-7104NI-E1/4P NVR

    I understand that, but I can't format it on the NVR as the USB is not even recognized...what section do I go to format it?
  4. E

    Network Unreachable for Cameras on DS-7104NI-E1/4P NVR

    It is a 16GB FAT32 USB drive...why would I need a smaller one? I also created an anonymous FTP site on my windows 10 machine, but when I try to upgrade through that option it says it cannot establish the connection to the FTP server, which is accessible from all other computers on the network...
  5. E

    Network Unreachable for Cameras on DS-7104NI-E1/4P NVR

    How do I do that? The USB drive is not even recognized by the NVR...
  6. E

    Network Unreachable for Cameras on DS-7104NI-E1/4P NVR

    Cannot set that same IP address, it says it's being used by the system NVR. I downloaded firmware, put it on a formatted USB Flash Drive FAT32, and it's not being recognized by the NVR... Things getting complicated although it shouldn't...
  7. E

    Network Unreachable for Cameras on DS-7104NI-E1/4P NVR

    Hello, I will attach file with settings from the Web GUI: PS: I also tried to change the internal NIC Address IPv4 to be on same subnet as 10.8.150.X but it gives an error message. This clearly cannot be changed, and cameras can only be accessed through Virtual Host feature.
  8. E

    Network Unreachable for Cameras on DS-7104NI-E1/4P NVR

    Hello everyone! I have just inherited a Hikvision NVR which I was successfully able to reset to factory defaults, including password. So I hooked it up to a switch in my network with subnet 10.8.150.X, the NVR gets IP parameters from DHCP according to that subnet. Next, I have a POE camera...
Back
Top