Recent content by DBM

Thanks again Phil, I've changed a few settings tonight and my 4x4 view over hdmi on the big screen TV is currently stable, switched it to 1080p from 4k for now, spent a while looking for where I can set the video outputs over hdmi to Sub from Main and can't find it, do I just click on the Main...

Thanks Phil, assume that's on both VGA and HDMI ports? I've tried using a Web browser on my TV as Sub Stream isn't great quality on the big screen but I get a plug in not available message and no video displayed, is there a browser that works properly on Samsung TVs?

Hi, came across this post when looking up info on this same issue, I've got a Hikvision DS-7616NI-I2/16P (newer version of the NVR you refer to above?), I had 3 Hikvision 4k 8mp cameras connected and could watch their feed on my monitor connected direct to the NVR and my TV connected via a 4k...

I've used similar to the one in the attached picture, unsure of which ones would fit your camera but there's plenty room to coli the cable and connectors inside it.

Hi Chris, could you use a mount for the camera? I've got these on my Hikvision 4k turrets and the POE tail is coiled inside them meaning only my cat5e cable needed ran to the camera before I fitted the connector to it, so no connectors had to pass through holes in walls.

Hi All, Installed a DS-2CD2H85FWD 4K varifocal turret camera last week, it worked for a day then stopped, seemed a bit damp in the RJ45 socket when I took it down, this camera doesn't have the little pigtail extension cable though, it has a little connector module screwed into the inside of the...